Parts & Accessories

Lock your panniers to your rack with Ortlieb's QL2 Anti-Theft Device. Simply mount the steel cables on your bags with the included hardware and then securely lock them in place.

These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs

Replacement hardware for Axiom rear racks. - Includes upper arms and mounting hardware

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Features - Spring clip add-on for Rack-It Metro E - Attaches to rack to add on spring clip function - Great for holding smaller items without using a bungee

Extend the life of your Dummy bags with this replaceable wear patch.

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

- Replacement cable for the Ortlieb Ultimate 4,5 & 6 Mounting systems. - Works with standard Ultimate 4,5 & 6 mounts as well as the Extension adapter part E165. - 105cm (41 inches) long.

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).

Accessory to attach Thule Pack ’n Pedal pannier magnet onto virtually any other bike rack. • Attach the Thule magnet to the adapter bracket (sold separately) for attachment to virtually any type of bike rack. • Versatile design allows for a variety of attachment options.

• 24-inch long double strap • Vinyl-coated hook ends

- Clamp-set for seatstay mounting for 16mm - For mounting a rear carrier on seatstays without eyelets

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

Front Rack mid-blade adaptor kit.

Dimension Bicycle Mounted Rack Parts - Sold as a pair - For 14mm-16mm seat stays - Nuts and bolts included - Plastic coated for secure attachment to frames without braze-ons

Features - Required fender mounting bracket when installing the Rack-It Metro E rack to E-Bikes with fenders - Provides the needed support for the rear fender when upgrading to the Rack-It Metro E Rack

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

Axiom's Elastic Cargo Net keeps your cargo in place. Its 6-hook design and shock cord construction make it a flexible fit for most every rack and basket. Designed for baskets and racks, this durable shock-cord net holds cargo securely in place while sturdy hooks ensure years of reliable performance. - Durable elastic shock cord. - Anti-rust steel hooks. Features Fits most baskets. Can be used on rack platforms to hold odd shaped items, like soccer balls, or backpacks.

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.