Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seat Bags

Banjo Brothers X-Large Waterproof Saddle Trunk
$64.99
Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported
Banjo Brothers Minnehaha Canvas Saddle Bag (Medium)
$69.99
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you huge carrying capacity, it classes up any ride. You can pack a picnic and extra clothes while the 3-point attachment and hardwood internal support keep the load stable. The main panel of the bag boasts a durable, layered 18-ounce canvas construction and the bottom is reinforced with a riveted plate to keep your bag from sagging under load. Clever details include detachable reflective tabs, an interior wallet pocket and exterior lashing points so you can attach a jacket or walking shoes.
Salsa EXP Series Seatpack Small
$69.99
The EXP Series Seatpack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Durable 500D coated nylon material strategically placed in high wear areas - Roll type closure with buckle for managing overall volume - Adjustable seat rail mounting strap included - Weight: 184g - Volume: 3L
Brooks Challenge Tool Bag
$100.00
The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L
Ortlieb Seatpost-Bag - Medium
$115.00
Ortlieb's Seatpost-Bag is an easy way to add extra carrying capacity to your bike. Tool-free mounts make it easy to get on and off, and switch from bike to bike. The roll-top closure makes it sealed from the weather and splashes, and allows for tight packing. The whole thing is made from waterproof nylon and Cordura, and even acts like a fender, keeping your back muck free. It's available in two sizes, the small one being suitable as additional bag for longer trips, the large version might even replace a backpack.
Brooks Challenge Large Tool Bag
$135.00
The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L
Revelate Designs Viscacha Seat Bag
$140.00 - $150.00
The iconic big seat bag for big trips! The Viscacha (vis-KA-cha) does it all. Take it on the Great Divide Route, the Iditarod trail, or any other epic route. Proven time after time in the longest and hardest endurance events on the planet, whether dirt, pavement, or snow. Features: - Roll-down closure allows bag to expand or compress in volume - EVA stiffened front and bottom plastic sheet provide rigidity and structure for load carrying - Adjustable position saddle rail strap with urethane-coated webbing provides fore-aft adjustment along saddle rails - Internal compression strap for snug packing and internal separation - Overkill aluminum loop seatpost wrap strap - Loops on top for attaching a bungee or spocket - Carbon seatpost friendly - Made in the USA with domestic and imported materials Sizing: - Minimum of 9.5" clearance from saddle rails to top of tire - Minimum length of exposed seat post is 5" - This is a big seat bag. Check tire clearance with bag properly packed and loaded prior to use to prevent bag damage or worse. On full suspension bikes fully compress rear suspension and check tire clearance prior to use. Using a Thudbuster post? See www.revelatedesigns.com for more information. Specifications: - Weight: 13.8 oz. - Volume: 6L - 14L - Materials: VX 21 X-pac; Rhinotec gusset panel; high-density EVA foam; HDPE plastic
Revelate Designs Terrapin System Seat Bag
$155.00
Want to quickly unload your entire seat pack and keep everything totally waterproof? The Terrapin is your answer. The Terrapin System is a holster-like mount with integrated 3D-tapered shape RF welded drybag. With the drybag you get a 100% waterproof system where the load can be quickly removed from the bike for packing or unpacking. The Terrapin is compatible with the Spocket top pouch. Features: - Quickly removable drybag system. Pack the bag at camp then load on bike. - Air Purge valve on right side of bag to enable compression - Side wing compression system featuring rigid foam side panels with fiberglass stiffening and an HDPE bottom sheet - The lower side wing straps feature an upward pull, 3:1 mechanical advantage which engages the side panels - Plastic- and foam-stiffened top-mounting panel - Will not bend or break when tossing the bike around or crashing - Dual, cam-locking closure buckles - Customizable top panel system: Add a bungee, pair of straps, or accessory pocket - Blinky light compatible - Alloy loop at seatpost attachment for strength - Made in USA with domestic and imported materials/drybag imported Sizing: - Minimum of 9.5" clearance from saddle rails to top of tire - Minimum length of exposed seat post is 5" - This is a large seat bag. Check tire clearance with bag properly packed and loaded prior to use to prevent bag damage or worse. On full suspension bikes fully compress rear suspension and check tire clearance prior to use. Specifications: - Weight: Terrapin - 13.0 oz.; Drybag - 6 oz. - Volume: Drybag - 14L with three rolls of the closure - Materials: Revelate exclusive VX 21 polyurethane coated X-pac; Rhinotec; Drybag: 200-denier waterproof TPU laminated nylon
Ortlieb Seat-Pack
$160.00 - $175.00
Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the Ortlieb Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters or from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. The smaller of the two models needs only six centimeters on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full suspension bikes and adjustable seat stems. - Compact, waterproof saddlebag with roll closure - Ideal for bikepacking, alp-crossing, touring - Ideal for small bicycle frames and full suspension mountain bikes - Light weight sturdy PU laminated rip stop nylon - Air release valve to easily purge the bag of trapped air, allowing for tighter compression - Heavy-duty fabric used at the saddle rail mounting location - Heavy-duty hook and loop fasteners with a soft grippy surface ensure slip-free seat post fixation - Sturdy PE inner stiffener - Saddlebag acts as mudguard - Can be mounted to carbon seat posts - 3M Scotchlite reflectors - Suitable for round seatposts with a diameter of max. 31.8 mm - Maximum capacity 3 kg/6.6 lbs.
Previous page Page 2 of 2