These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
- Wet or muddy condition cable sealing solution
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other and making rattling noises, and they provide a tidy custom look, too.
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Break-Away Quick Disconnect - Time-saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener - Available for both derailleur and brake cables - Brake Quick Disconnect sold individually
- Sold in pairs. - Allen wrench included.
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10
$21.99 - $25.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$5.49 - $49.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.
$9.99 - $65.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
This aluminum link housing is the ultimate combination of durability and attention grabbing looks. Available in Black, Red, Silver, Gold, or Blue—it's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means precision shifting. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional linear strand housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 20% lighter than traditional linear strand shift housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (MCK755) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue In the Box: - Front Cable Length: 1500mm - Rear Cable Length: 2300mm - Housing Length: 450mm w/920mm Lubed Liner - 450mm w/2000mm Lubed Liner - 380mm w/1100mm Lubed Liner - 310+350mm w/1300mm Lubed Liner - 30 Links - 15 Mini Tube Tops - 6 Cable Donuts - 2 Cable Tips - 2 Rotating Hooks - 1 Dirt Guard
$1.00 - $59.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
$29.99 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
$13.99 - $16.50
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$4.99 - $10.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$11.99 - $16.49
Jagwire's Sport Slick Teflon Shift Cable is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.
$21.99 - $25.99
A great replacement for OE cables and a perfect way to bring style to a bike, our Universal Sport Brake Kits make it easy. They come with double-ended Slick Stainless cables compatible with SRAM and Shimano road and mountain systems. Our new and improved Slick-Lube liners reduce friction, providing improved shifting precision and long-lasting performance. - Double-ended brake cables are compatible with both mountain and road brakes - Sport Slick Stainless cables combined with Slick-Lube housing liners offer dependable braking performance and durability - All parts needed for a complete brake cable/housing install are included - OEM-level cables and housing with high-quality small parts
- Aluminum straddle cable carrier for cantilever brake
- Precision-machined brass brake cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables - 50-count bottle
- Precision-machined cable ferrules for improved braking and shifting performance. - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 50-count bottle
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
- Shimano brand casing with internal lining for optimized response - Brake: offered in a stiffer (M-System) for MTB, or a more pliable (SLR) version for road applications (can be used for either discipline depending on user preference) - Derailleur: (SIS-SP41) compressionless design pre-lubricated with silicon grease to decrease cable friction
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets
$89.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
Page 1 of 4 Next page