Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

$2.25
- Wet or muddy condition cable sealing solution
$45.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
$49.00
Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black
$51.00
Original equipment hydraulic hoses for no-compromise brake performance. - 2000mm, black
$4.00
- Sold in pairs. - Allen wrench included.
$1.25 - $9.99
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10
$24.99 - $28.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$6.99 - $54.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$9.99
Extend housing runs using these double-ended junction end caps.
$21.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$13.00
Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.
$10.99 - $72.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
$49.99
This aluminum link housing is the ultimate combination of durability and attention grabbing looks. Available in Black, Red, Silver, Gold, or Blue—it's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means precision shifting. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional linear strand housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 20% lighter than traditional linear strand shift housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (MCK755) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue In the Box: - Front Cable Length: 1500mm - Rear Cable Length: 2300mm - Housing Length: 450mm w/920mm Lubed Liner - 450mm w/2000mm Lubed Liner - 380mm w/1100mm Lubed Liner - 310+350mm w/1300mm Lubed Liner - 30 Links - 15 Mini Tube Tops - 6 Cable Donuts - 2 Cable Tips - 2 Rotating Hooks - 1 Dirt Guard
$1.00 - $69.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
$34.99 - $69.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$18.00
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes
$74.99 - $79.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
$5.49 - $15.00
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$5.49 - $15.00
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$5.49 - $12.00
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$26.99
Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10
$6.00
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$29.00
- Dispenser of chromed ferrules - 5mm
$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$5.99
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$89.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
$43.90 - $49.90
- Brake casing has internal lining and external plastic coating - Length: 30m
$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
Page 1 of 5 Next page