Parts & Accessories

Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.

• Square taper interface • Only includes left crank

Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only

TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.

Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II

Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.

The newly redesigned All-Mountain Guide is the love child of two innovative and revered product lines, the 1x and XCg. Perfectly suited to the increasingly popular all-mountain segment, the All-Mountain Guide shares the freshly updated "TR" upper guide with the 1x, and adds MRP's patented integrated skid. The All-Mountain Guide is a great choice for 5-6" travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention means the All-Mountain Guide will be virtually silent and completely drag-free when pedaling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. - Perfect for "clutched" 1x10 and 1x11 drivetrains, as well as those using chain-retaining rings (like our Wave Ring) - New nylon integrated skid protects chainrings and glides over rocks and obstacles - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - Available in 28-32t and 32-38t sizing - All install and adjustment operations possible with just a single 4mm HEX wrench. - Compatible with chainlines 49mm and wider

All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact. Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs. - Material: CNC machined 6061-T6 aluminum

Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread

For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Specialized S-Works cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. One chainline option is available for S-Works cranks. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M1 (minus 1mm - dished toward the frame): For 49mm chainline, designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers

Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II

- Series: SLX - Crank Construction: HOLLOWTECH II Technology

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

Choose the Hope Crankset Spider you need for the chainring combination you want. - Interchangeable and replaceable on Hope Cranksets - Single chainring model for use with a single 104BCD chainring with or without bashguard - Double chainring model for use with a 64/104BCD double chainring setup - Allows installation of bashguard on outer position

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag

Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.

Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.

- Lower slider replacement parts for E-13 chainguides

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin

- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool

SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.

- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair