Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Grips

All-City Track Grips
$10.00
• Classic track grips • 175mm length
Brooks Slender Cambium Grips
$59.99
The design of Brooks Slender Cambium Grips incorporates an aluminium shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The tape is made from organic cotton and rubber and is held in place by aluminium clamps.
Chromag Format Grips
$27.00
The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.
Chromag Palmskin Grips
$30.00
Chromag's Palmskin grip is designed for riders who like a softer, supple feel and may prefer not to use gloves. The ribbed pattern is compliant under the hand while managing moisture by channeling it away into the groove.
Chromag Basis Grips
$31.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Chromag Squarewave Grips
$31.00
Chromag's Squarewave grip is designed with performance and comfort as the paramount goals. The gentle bulge fits nicely in the cup of the hand to promote long ride comfort. The progressive tread is finest/softest where it meets the outer edges of the hand and coarsest under the meat of the palm for a balance of compliance and control over longer rides.
Chromag Clutch
$34.00
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Chromag Squareweave XL Grips
$34.00
• Larger diameter model for bigger hands, offers extra cushion • Same bulged center as the original Squareweave • Aluminum clamps secure the grip on both for twist-free performance
Dimension Cruiser Grips
$7.99
Dimension Classic Cruiser Grips available in black and white. - Flange: No - Grip Shift Specific: No - Length: 140mm - Lock On: No - Shape: Round - Weight: 104g
ESI Racer's Edge Grips
$16.99 - $18.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Chunky Grips
$18.99
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Extra Chunky Grips
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Grip XL 6.75
$29.99
Extra Chunky XL 6.75" are over 30% longer than standard grips!
ESI Grip XXL 8.25
$29.99
Extra Chunky XXL 8.25" are over 60% longer than standard grips!
ESI Fit CR Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. CR stands for Chunky, Racer’s Mix. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Fit XC Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
Eclat Pulsar Grips
$10.99
This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs. - Includes Eclat nylon bar plugs - Longer design for today's wider bars - Manufactured in the USA by ODI
Ergon GP1
$29.95
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
Ergon GA2
$30.00
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Ergon GA3 Small
$35.00
More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!
Ergon GC1 BioKork
$39.95
The sustainable BioKork version of the GC1 grip, developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 BioKork corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
Ergon GE1 Evo Factory
$40.00
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
Ergon GP2
$50.00
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
Ergon GP3
$50.00
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting
Ergon GP3 BioKork
$59.95
The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting
Ergon GP4
$70.00
The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)
Ergon GP5 BioKork
$79.95
The BioKork version with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Cannot be used on carbon handlebars - Bar end material: fiberglass composite with rubber inserts - Uses: touring, commuting
Giant Youth Grips
$8.00
The Youth Grips are a great way to spruce up Junior's ride. They look great and are soft and comfortable too.
Lizard Skins Cut-to-Fit Bar End Grips
$8.99
Lizard Skins bar end grips are 165mm in length, cut to fit neoprene.
Lizard Skins Mini Machine Grips
$9.99
- Smaller diameter and shorter length (105mm) comfortable grip made from elastomer material that lasts longer than conventional grip rubber - The softness of the single compound grip will keep your hands feeling pampered while riding
Lizard Skins Moab Grips
$9.99
Lizard Skins' Moab Grips are an awesome upgrade for your bike. Easy to install, these single-compound grips offer a comfortable texture that lets you easily hold on for great control.
Lizard Skins Single Compound 494 Grips
$9.99
A new pair or Lizard Skins' 494 Grips is just the ticket to give your two-wheeled ride a fresh look and feel. Comfortable and easy to install, these single-compound grips let you easily hold on for great control.
Lizard Skins Single Compound Charger Evo Grip
$9.99
The Charger Evo is the most complex grip we’ve ever created. Dual-patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single-compound grip makes application and removal easy in a grip that athletes can count on. Single Compound Grips include push in plugs. - Length: 140mm - Weight (with plugs): 108 grams - Diameter: Medium (31mm)
Lizard Skins Single Compound Charger Evo w/Flange
$9.99
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single compound grip with flange secures and protects the hand so athletes can focus on the road. Single Compound Grips include push-in plugs. - Length: 140mm - Weight (with plugs): 134 grams - Diameter: Medium (32mm)
Lizard Skins Single Compound Charger Grip
$9.99
Feel the comfort of our popular Charger grip. The unique pattern gives the Charger grip an amazingly comfortable feel that is soft yet long lasting. Single compound grip includes push in plugs. Length: 130 mm Weight (with plugs): 95 grams Diameter: 31.75 mm
Lizard Skins Single Compound MacAskill
$9.99
The MacAskill Signature grip is now available in a Single Compound grip. This grip has a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration damping. Designed by Danny MacAskill! Single Compound Grips include push-in plugs. - Length: 136mm - Weight (with plugs): 88 grams - Diameter: Small (29mm)
Lizard Skins Single Compound Northshore Grips
$9.99
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest single compound grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 33.25 mm
Lizard Skins DSP 30.3mm Grips
$29.99 - $31.99
- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape
Lizard Skins DSP 32.3mm Grips
$31.99
- 32.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 30 grams per set - Includes plugs and double sided tape
Lizard Skins Danny MacAskill Lock-On Grips
$31.99
The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single-sided lock-on grip - 29–30mm diameter
Lizard Skins Lock On Charger Grip
$31.99
Feel the comfort of Lizard's popular Charger grip. The unique pattern gives the Charger grip an amazingly comfortable feel that is soft yet long lasting. Lock-on grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 105 grams - Diameter: 31.25 mm
Lizard Skins Lock-On Charger Evo
$31.99
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)
Lizard Skins Lock-On Northshore Grips
$31.99
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 125 grams - Diameter: 33 mm
Lizard Skins Lock-On Peaty Grip
$31.99
Ride like a pro with the Steve Peat inspired Signature lock-on grips. Lock-on grips are designed to easily slide onto the handlebar and clamp with the rings to ensure it is secure and won’t slip during the most intense rides. Providing a sturdy ride, the patented lock-on design eliminates unwanted movement to maximize the rider’s control and comfort. Lizard Skins lock-on grips include the grips, clamps, screws, and plugs. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 30.5 mm
Lizard Skins Logo Lock-On Grips
$31.99
Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Lock-on grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 120 grams - Diameter: 31.5 mm
Lizard Skins Single-Sided Lock-On Machine
$31.99
The classic upper pattern with a waffle finger hold for a better grip. - Compatible with MTB, BMX, ATV, PWC - Weight: 101 grams - Length: 135mm - Diameter: Medium (31mm)
MSW EFG-100 One-Piece Ergonomic Grip
$15.00
The extra material on MSW's EFG-100 grips isn't for good looks: it's to spread the pressure across more of your hand, resulting in less stress and fatigue. • Comfortable, ergonomic shape • Reduces hand fatigue while riding • Thermoplastic rubber
ODI Flangeless Longneck
$10.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included
ODI Longneck ST BMX Grips
$10.95
The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included
ODI Maiden America Grips
$10.95
Designed in part with FBM Bikes in conjunction with the FBM/Profile Racing/ODI Maiden America tour series. - Length: 143mm
ODI O-Grip BMX Flange Grips
$10.95
"O" Grips for BMX offer an improved feel right out of the box and improved traction from the multi-directional rib pattern. - New softer durometer compound offers improved comfort right out of the box - Multi-directional rib pattern provides excellent shock absorption - Thicker O-shaped ribs offer improved control - Includes Push In Style end plugs
ODI O-Grip BMX Flangeless Grips
$10.95
The "O" grips feature a lightweight, multi-directional rib design. - Made in the USA by ODI - Larger ribs run throughout the grip pattern for more control when you need it - Includes ODI Push-In style end plugs
ODI Soft X-Longneck Grips
$10.95
The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm
ODI Cult x Vans Flangeless Grips
$10.99 - $11.99
The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm
ODI Cult x Vans Grips
$11.99
The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm
ODI Hucker Signature BMX Flange Grips
$12.95
Mike “Hucker” Clark brings his SoCal attitude to life with the new Signature Hucker Grips. Designed for both aesthetics and performance. The 160mm grip’s California-inspired beach scene has been intricately laid out to provide traction and padding in key areas where they are needed most. - Features a unique two material design that allows for improved bar adhesion and less grip slippage - Soft vertical ribs provide excellent padding - Horizontal ribs on front of the grip offer improved traction
ODI Lock-On Grip Clamps
$16.49
- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs
ODI Rogue Lock-On MTB Grip Core
$16.49
The Rogue grips feature soft, large raised pads to provide extra shock absorption. - Made in the USA by ODI - Lock Jaw clamps sold separately
ODI Aluminum End Plugs
$17.95
- Made from 6061 aluminum for durability and long lasting protection - Includes heavy duty hardware to eliminate weak points - Designed with the double sliding wedge system to accommodate a wide range of handlebar id's - Machined pockets on inside of plug allow plug to nest on the handlebar for a more secure fit
ODI F-1 Series Float Grips
$18.95
F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel
Page 1 of 3 Next page