Forks

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

Redesigned by the world’s fastest racers, for the world’s fastest racers, you want BoXXer in your corner. The all-new 38mm chassis is equipped with the DebonAir+ twin tube air spring that will have you thinking it’s a coil. Paired with a Charger 3 RC2 damper tuned for downhill speed, BoXXer Ultimate takes you straight to the top step of the podium. And with our new crown adjustment lines, setup is a breeze—no rulers required. FEATURES - 38mm chassis designed to meet the needs of the world’s fastest racers with balanced stiffness and ride quality - DebonAir+ twin tube air spring strikes the perfect balance between butter-smooth small bump feel, added support throughout the travel, and taller ride height for confidence when things get steep - Signature colorway BoXXer Electric Red with an all-new graphics package - RockShox premium fender compatibility (RockShox Bolt-On Fender included with purchase) - Lightweight machined and anodized crown for premium looks and durability - Crown height gradient creates a visual guide to simplify setup, no ruler required - Charger 3 damper tuned for BoXXer’s updated chassis and spring. Featuring High Speed Compression, Low Speed Compression, and a revamped Low Speed Rebound, every click is meaningful and exact. This allows the rider to tune to perfection with every click. - ButterCups block 20% of high-frequency “trail chatter” to reduce hand and arm fatigue, leaving you feeling fresh with more control - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride

Little riders with big dreams. Until now, a premium fork was tough to find for smaller riders. Hello Reba 26, a fork specifically tuned for lighter riders to simplify the ride experience and allow for a lower pressure range. - New graphics are easy to read and make a fresh impact - Specifically tuned for smaller riders - External rebound adjustment

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Coil Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - 20mm hex axle provides superior torsional stiffness - Forged I-beam style crown: bigger, stronger and more durable - 1-1/8" threadless steel steerer and 32mm steel stanchions - Can be reduced to 80mm travel with included spacers

Rebirth of an Icon. The R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 expert pairs superior damping thanks to our 3-position dual piston VTT damper with a lightweight and stiff 32mm chassis. - VTT damper with compression open mode and rebound adjustability - 32mm black anodized 6000 series aluminum stanchions with Reverse-Arch design - Internally adjustable from 120 to 80mm in 10mm increments - Available in two different offsets 44 or 51mm

Legends Never Die Back in a big way, the all-new Dorado Pro is ready to turn the suspension world upside down. Featuring an inverted design, carbon upper structure, 37mm stanchions, and refreshed internals the new Dorado Pro is the pinnacle of suspension technology. The new stiffer chassis is paired with an all-new sealed version of our TPC+ damper and improved Dorado Air Spring with an IRT volume adjuster. These technologies combined into one ultimate platform provide more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease. Key Features: - Carbon Fiber Legs and the 37mm chassis result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. They also have looks that can kill. - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IRT (Infinite Rate Tune) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. - Sealed TPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom-out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed buttons allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g

The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch

The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut

You love the accuracy, efficiency, and trail feedback that only a rigid mountain bike fork can provide. And, of course, you love carbon fiber. The Ritchey WCS Carbon Mountain Bike fork was made for you and your riding style. Our deep mountain biking heritage, decades of on-trail research, and mastery of modern materials come together to provide a fork that offers an unrivaled riding experience. The one-piece monocoque construction (WCS) of this fork also includes full carbon dropouts as well as non-removable, one-piece carbon disc brake tabs. This fork also features suspension-corrected axle-crown height, plus a Ritchey compression plug is included. - Material: carbon fiber - Quick release (not included) - Post Mount disc brake - Disc brake rotor compatibility: 160mm (max 180mm) - Steerer length: 300mm - Crown diameter: 50mm (straight 1-1/8”) – 61mm (tapered 1-1/2”) - Fork lenght: 459mm (27.5”) - 470mm (29”) - Rake/Offset: 42mm (27.5”) – 45mm (29”) - Spacing: 87mm - Minimum tire clearance: 6mm - Weight: 615g (with uncut steerer / not including axle)

The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160 minimum rotor size; 203mm maximum rotor size - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - Mid-blade mounts for low rider racks - Internal routing for 150mm spaced dynamo hubs - Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0" - 150 x 15 mm thru axle included - Front Axle Size: 15 x 198L, TP=1.5, TL=9

The Waxwing Deluxe fork is designed to thrive on gravel. Its carbon-fiber construction is lightweight and soaks up micro-impacts on rough roads. The 12 x 100mm thru-axle keeps Waxwing stiff for steady tracking and responsiveness when dodging ruts, potholes, and road debris really matters. Waxwing Deluxe is compatible with both 700c and 650B wheels so you run your preferred size. Three-Pack mounts, mid-blade low-rider rack mounts, fender mounts, and internal dynamo hub cable routing add form and function. The Waxwing Deluxe fork is standard equipment on the 2019–2020 Warbird, and is available in a version painted to match the Warbird frameset. - Thru-Axle included - Axle-to-Crown Length: 405mm - Brake Type: Disc, flat mount, 160mm maximum rotor size, 42mm bolt length - Color: Black - S.H.I.S. Crown Race: 40mm, 36°, integrated crown race - Fork Rake: 50mm - Front Axle Type: 12mm thru-axle - Front Axle Size: 12 x 120mm, TP = 1.5, TL= 12mm - Front Hub Spacing: 100mm - Material: High-modulus carbon fiber - S.H.I.S. Clamp Diameter: 28.6mm - Steerer Tube Length: 350mm - Steerer Type: 1-1/8" to 1-1/2" tapered - Weight: 520g - Max tire size: 700c x 45mm or 650B x 51mm

Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

Not that long ago mountain bikes were simple. Suspension opened up more terrain and, more importantly, it meant more fun. The original Z2 was there for the mountain bike suspension revolution. You simply mounted it on your bike and hit the trails. Less time prepping and fixing meant you could just focus on the ride. Twenty years later, that same DNA lives on in the new Marzocchi Z2, and it's ready to shred, offering smooth and plush suspension. The new-from-the-ground-up Rail damper combines low maintenance with intuitive ease of use and impressive on-trail performance. The top-of-fork simple sweep adjuster from firm to open can lock out the fork or fully open the system with plenty of positions in between. The Z2—it just makes everything easy. - 34mm stanchions - Enhanced lower leg stiffness with "M" arch design for maximum tire clearance - 15 QRx110mm axle design - Air sprung - Rail damper - Rake: 44mm

Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch

The ZEB is built with a stout, 38mm chassis and features the updated DebonAir spring with the performance of the Charger R damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - New, price point Charger R cartridge damper featuring an easy-to-adjust damper with just rebound adjustment - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

Diamond For The Rough. In a time where standards are being reinvented every day, it's important to look through the clutter to find clarity. Find out what's actually here to stay and make an impact. We start with a simple question: What's going to improve the product and rider? The new Diamond has a host of features to cater to the aggressive rider who demands more. We gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing that amplifies steering precision and control in the moments of "ultimate shred". We also increased the tire clearance, allowing you to utilize a bigger tire and still have clearance for mud. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic which means the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really get the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping

The Hurricane features P² Post Production heat-treatment for superior strength. Our one-piece, spiral-fluted (Vortex) steerer reduces weight without decreasing strength. The 31.6/1.4/1.1mm tapered legs are fluted as well, making these the strongest forks we've made to date. Top it off with our new, investment-cast 6mm-thick dropouts and you've got a fork you can trust to hold up to any style of riding. Vortex top cap included. - Height: 314mm - Steerer Tube Length: 172mm - Bearing Race: Machined/Integrated - Offset: 28mm - Compression Bolt: 24 x 1.5mm - Compression Bolt Tool: 6mm allen key - Colors: Matte Black - Weight: 36.2-ounces

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control™ damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low-speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds

More than 20 years ago, BoXXer changed the DH world when it hit the scene. Featuring Charger 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral. - Completely re-designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high- and low-speed compression adjust - Highly tunable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before. Features - New graphics package for a fresh, premium look - Highly tunable Solo Air spring - TwistLoc and OneLoc remote compatible

Get Inverted. Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - The Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount. - The new TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with carbon fiber legs - Externally Adjustable: high-speed compression, low-speed compression, and rebound - Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR Bleeders - Includes removable bolt-on fender

With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding. - Material: carbon blades / alloy steerer, crown, and dropouts - 1-1/8" straight steerer - Steerer length: 300mm - Axle-crown: 391mm - Rake/Offset: 48mm - Crown diameter: 45mm (1-1/8") - Spacing: 57mm - Minimum tire clearance: 6mm - Wheel compatibility: 700c - Fender mounts

The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork. Key Features: - 27.5” is 20g less than the previous model. - Expert air allows for internal travel adjustments with no added parts. - Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package. - Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts. - Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment. - 27.5” 110-150mm, 29” 110-150mm. - TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance. - Expert air spring and lower weight brings top-level performance to a new price point.

Riders asked for it, Marzocchi heard the call and proudly delivered a coil mountain bike fork worthy of its legendary predecessor. The Z1 Coil builds on the strong legacy of the original Bomber Z1 from the ‘90s that helped fuel the freeride movement. Weight weenies need not apply. Features: - Stout and proven 36mm chassis - GRIP damper - Ultra-lightweight tempered silicon-chromium steel spring, wrapped for near-silent performance - Integrated air assist for progressivity and bottom-out control - External preload adjuster - Adjustable travel in 10mm increments with included internal spacers

In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs. The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride. All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest.

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, Recon Silver is an all-around performer suited for any MTB. Features - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look - Includes Right OneLoc Remote

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle

E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount

The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package

With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)

The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug

Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup. - 12mm thru-axle, 100mm spacing - 700c x 42mm or 650b x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24 - Includes thru-axle and Whisky Parts Co. compression plug - Brake Mount: Flat Mount 140 - Material: Carbon - Weight: 526g - Steerer Type: Tapered - Offset/Rake: 45 - Steerer Tube Length: 350mm - Axle to Crown Length: 395mm - S.H.I.S. Crown Race Diameter: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 - Fork Minimum Rotor Size: 140 - Fork Maximum Rotor Size: 160

The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts

Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance

The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug

One of the most successful and hard-working RockShox forks of all times capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds

With bigger bikes come bigger demands. The new Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. Nothing goes as big as Domain does in value and performance. - 38mm chassis for increased stiffness and rider confidence - Motion Control RC damper featuring low speed compression adjust with externally adjustable dual-flow rebound - Highly tunable DebonAir air spring offers a consistent feel throughout the travel - Maxima Plush damping fluid reduces friction and quiets damper noise - Short fender compatible. RockShox premium fender sold separately. AM Variants include RockShox zip-tie fender - Fits tires up to 2.8" without fenders—use of any fender may reduce tire clearance

Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again. - VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built-up air within the lower legs to keep things butter smooth between service intervals Product Details: - VTT-6P damper provides 6 clicks to tune damping for all types of terrain - 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness - IVA, Air Volume Adjustability by rearranging self-contained spacers - TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals - Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers - 2.6" maximum tire width

The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by. Features: - Fully redesigned - Laboratory tested and team proven - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race - New, optimized, 4mm dropout shape for grind and peg clearance - Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474 - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty Specs: - 25mm steep offset - 3/8-inch axle slots only - 990 brake mounts - Starting at 2lb 2oz (912 grams)

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

A carbon fork designed for bikepacking and endless exploration. Experience easier carrying of all possible accessories for everything from overnight endeavors to epic self-supported excursions with the ENVE Adventure Fork. The ENVE Adventure fork provides a lighter weight option for bikepackers and frame builders, while still maintaining reliability and strength. The dynamo light and charger routing is an integrated and protected solution to self-supported bike riders' needs. Finally, the fork chip option gives builders versatility in the fork by adjusting the axle-to-crown for different bike geometries for alternative bikepacking methods. In a market that's filled with heavy steel fork options, the ENVE Adventure fork offers bikepackers an opportunity to lighten their overall bike load through our trusted carbon fiber fork expertise. - Three-Pack Accessory Mounts - Fender and Rack Mounts - Reversible Drop-Out Chips for Adjustable Axle-To-Crown and Rake - Internal Dynamo Routing for Lights and Electronics Charging - Axle Spacing 12 x 100mm - Compatible Rotor Sizes 140mm & 160mm - 700 x 50mm Tire Clearance

- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible. - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available. - Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount) - 34mm carbon legs with forged aluminum crown and dropouts - Max Rotor Size 185mm or may void the warranty - 3 different sizes for optimal ride height.

- All Mountain/Enduro fork with 35mm stanchions - Twin-tube damper with low-pressure IFP and air spring (positive and negative air chambers), internal travel adjustment (120-160mm of travel in 5mm increments*) easily adjustable, and all parts included - ChocoLUXE Internals - ChocoLUXE is a proprietary material utilized in the damper plug, damper seal, damper IFP, and damper support. - Norglide Bushings—Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. - Damper adjustments include air spring pressure, 8-position compression, ramp control (air spring ending stroke feel), and rebound - Ramp Control—'on the fly' ending stroke compression adjustment - 74mm post-mount 180mm disc brake only - Boost 15x110mm QR thru-axle - Every MRP fork is built in the MRP factory and dyno verified to ensure the highest level of quality and ensure long-term reliability - 4.2lb (1950g)

Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design. - 1-pc machined steerer tube with an integrated bearing race - Tapered legs - Tire clearance for 2.40” tires - Updated top cap retention design

Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.

The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)

Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut

Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs - Fits tires up to 5.25" wide - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g